Brampton Boom Lift License

Brampton Boom Lift License - Just completely qualified persons should operate an aerial boom lift. Qualification can be attained through a combination of classroom sessions and practical training with the particular type of aerial lift that would be utilized on the job. A License is needed for anybody who operates or works on an aerial boom lift.

Various kinds of vehicle-mounted aerial devices comprise extensible boom platforms, aerial ladders, vertical towers, articulating boom platforms, and any combination of these kinds.

When using a boom lift, there are a few basic safety rules that apply to all boom lifts. Safety of the worker is a top priority whilst they are working within the basket. The worker should at all times put on a body harness and lanyard, attaching it to the boom or basket. Never tie off to a structure, equipment or an adjacent pole. Personnel should stand on the basket floor, and never climb or sit on the edge of the basket. The manufacturer's load limitations must be adhered to.

Lift operators must be authorized to operate an aerial lift. The manufacturer's manual should be kept in the lift and the operator should know all aspects of that specific unit. Operators are responsible for ensuring that safety procedures are followed in operating the lift. Testing lift controls on a daily basis should be performed. Set brakes and position outriggers (if they are used) on a stable surface or on pads. When working on a slope, utilize wheel chocks.

The aerial lift vehicle should never be moved whilst a worker is in the basket of an elevated boom, unless they are utilizing equipment that are particularly designed for this. Articulating boom and extensible boom platforms made use of as personnel carriers must have plainly marked, accessible, upper controls. Except for in emergency conditions, lower controls must not be used to override upper controls unless authorization has been given by the person in the lift.

While working from an aerial lift, do not wear pole or tree climbers.
Do not alter the insulated part of the aerial lift.
Do inspect the booms to ensure it is correctly cradled and the outriggers are in the stowed position prior to moving.
When operating a boom lift next to power lines, make certain that the lines are di-electrically tested according to local regulations.

Click to Download the pdf