Brampton Forklift Training Programs

Brampton Forklift Training Programs - Are you looking for a job as a driver of a forklift? Our regulatory-compliant mobile equipment operator training offers instruction in kinds of lift trucks, pre-shift inspection, fuel kinds and handling of fuels, and safe operation of a lift truck. Hands-on, practical training assists participants in obtaining essential operational skills. Program content consists of existing rules governing the operation of forklifts. Our proven forklift programs are intended to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

Do not lower or raise the fork while the forklift is moving. A load must not extend above the backrest because of the possibility of the load sliding back toward the operator. Check for overhead obstacles and ensure there is sufficient clearance prior to lifting a load. Stay away from overhead power lines. When the load is raised straight up, tilt it back slightly.

The lift truck is less stable if a load is in a raised position. Make certain that no one ever walks beneath the elevated fork. The operator must never leave the lift truck while the load is raised.

While handling pallets, forks must be level and high enough to go into the pallet and extend all the way beneath the load. The fork's width must provide even distribution of weight.

Set the brakes and chock the wheels before loading and unloading the truck. The floors should be strong enough to support the combined weight of the forklift and its load. Fixed jacks can be installed to support a semi-trailer which is not coupled to a tractor. The entrance door height must clear the height of the forklift by a minimum of 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Do not stay inside a forklift for a long time without proper ventilation. The inside of the truck must be well lighted and free of obstructions, trash and loose objects. Inspect for holes in the floor. The installation of material which are non-slip on the floor would help avoid slipping. Clear whichever obstructions from docks and dockplates and make certain surfaces are not oily or wet.

Forklifts should not be used to tow or push other forklifts.

Click to Download the pdf